Tip one

According to the use situation, the cartridge filters can be divided into liquid filtration and gas filtration, and their size is normally 5 “, 10 “, 20”, 30, and 40 “, etc. Because the aperture of the filter element is different, the flow rate is not the same. For example, if the aperture of the filter element is 0.2um — 0.4um, then it can filter the turbid water  300-500kg /h, multi-core or a combination of 20 “, 30 “and 40” “can be used to improve the filtration capacity per hour.


Tip two

To get a suitable filter element, you need to select the appropriate aperture. If you want to sterilize, the selection of 0.2um-0.5um aperture filter element is better during the application of medicinal injection, antibiotics, blood products, etc. If you want to remove particles, microorganisms, and bacteria during the application of white wine, yellow wine, wine, oral liquid, then you can choose the aperture of 1~5um.To filter high-temperature gas and fermentation air disinfection gas, we are suggested to choose Teflon filter element.


Tip three

To achieve the purpose of fine filtration, pre-filtration equipment must be used in the early stage, and then use microporous sterilizing filter elements,such as Bromen pleated cartridge filter and ELC pleated cartridge filter.


Tip four

For the filtration of mineral water, sterile water for medical use, electronic 2D1R integrated circuit water, and high-quality water for the food industry, the cartridge microporous filter should be designed as an independent filtration system, which can be back washed to save production costs.


Tip five

when using stainless steel filter housing, pay attention to whether the filtered liquid has a corrosion effect on stainless steel. If not applicable, the filter of other materials should be selected.

Leave a Reply

Your email address will not be published. Required fields are marked *